Central composite and factorial design of experiments for textile dye removal from solution by pumice, KOH-pumice, HCl-pumice, kaolinite, KOH-kaolinite, HCl-kaolinite clays
Abstract
The pollution of surface waters by the textile dye-containing wastewaters causes to an increasing concern
throughout the world. Methyl violet is a toxic, mutagenic and harmful textile dye against humans. Clays
are cheap and vast adsorbents in the nature. Methyl violet dye removal from solution was studied by raw
pumice and raw kaolinite using the central composite experimental design method. Firstly, raw kaolinite
and raw pumice were tested for the dye adsorption and then capacities of raw kaolinite and raw pumice
were aimed to increase by KOH and HCl modification. The experimental parameters studied for the
central composite design were initial pHs (2-10), adsorbent amounts (0.2-1 g/50 mL) and initial
concentrations (100-500 mg/L). In central composite experimental design of raw kaolinite and raw
pumice, the all parameters were found as statistically unimportant for kaolinite and pH, pH-pH,
concentration-concentration parameters were found statistically important and other parameters were
unimportant for raw pumice. Maximum capacities for raw pumice and raw kaolinite were calculated as
7.15 and 18.31 mg/g, respectively. The dye removal of KOH-pumice and KOH-kaolinite were not high
from raw pumice and raw kaolinite. HCl modified kaolinite and pumice were ineffective for dye removal.
Kinetics of dye removal by raw kaolinite fitted to the pseudo second order model. pHpzc values of raw
pumice and raw kaolinite were found as 6, respectively. Dye removal was obtained as 90% for 50 mg/L
dye concentration by kaolinite. Raw kaolinite was determined as the most effective adsorbent for dye
concentrations especially below 100 mg/L.
Source
Celal Bayar Üniversitesi Fen Bilimleri DergisiVolume
20Issue
3Collections
Related items
Showing items related by title, author, creator and subject.
-
Use of pumice fine aggregate as an alternative to standard sand in production of lightweight cement mortar
Değirmenci, Fatma Nurhayat; Yılmaz, Arın (Natl Inst Science Communication-Niscair, 2011)The purpose of this study is to evaluate the possibility of using granulated pumice as an alternative to fine aggregate in production of lightweight cement mortar. The cement/pumice fine aggregate ratio is 1:3 for pumice ... -
Polidimetilsiloksan nanokompozitlerinin sentezi ve karakterizasyonu
Özvezir, Esra (Balıkesir Üniversitesi Fen Bilimleri Enstitüsü, 2022)Bu çalışmada, esnekliği, reaktif olmayışı, dayanıklılığı ve transparan oluşu nedeniyle bir çok alanda kullanıma sahip olan polidimetilsiloksan (PDMS) elastomerine daha önce etkisi incelenmemiş olan nano boyuta indirilmiş ... -
PVB/pomza ve PVB/skorya kompozitlerinin hazırlanması ve karakterizasyonu
Hepöz, Şengül (Balıkesir Üniversitesi Fen Bilimleri Enstitüsü, 2023)Bu çalışmada optik özellikleri nedeniyle birçok alanda kullanıma sahip olan polivinil bütiral polimerine yeni özellikler kazandırmak amacıyla asidik pomza, bazik pomza ve skorya doğal volkanik kayaçları 1 mikronun altındaki ...