| dc.contributor.author | Ateş, Ergün | |
| dc.contributor.author | Barnes, Stuart | |
| dc.date.accessioned | 2019-10-17T11:59:50Z | |
| dc.date.available | 2019-10-17T11:59:50Z | |
| dc.date.issued | 2012 | en_US |
| dc.identifier.issn | 0261-3069 | |
| dc.identifier.uri | https://doi.org/10.1016/j.matdes.2011.08.042 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12462/8867 | |
| dc.description | Ateş, Ergün (Balikesir Author) | en_US |
| dc.description.abstract | In this study, polyester resin and quartz are used as binding and filling materials. In accordance with different aggregate diagrams and binding rates designed on standard cement concrete grain-size curves, polymer concrete composite samples were prepared. Such samples were initially solidified at room temperature and then placed in an oven at 50 degrees C, 75 degrees C and 100 degrees C. The samples were then compression tested. As a result of the compression strength determination and analysis, it is observed that the elevated temperature treatments increased the compression strength. The highest compression strength is obtained in a temperature of 75 degrees C. | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Elsevier Sci Ltd | en_US |
| dc.relation.isversionof | 10.1016/j.matdes.2011.08.042 | en_US |
| dc.rights | info:eu-repo/semantics/openAccess | en_US |
| dc.subject | Polymer-Concrete | en_US |
| dc.subject | Density | en_US |
| dc.title | The effect of elevated temperature curing treatment on the compression strength of composites with polyester resin matrix and quartz filler | en_US |
| dc.type | article | en_US |
| dc.relation.journal | Materials & Design | en_US |
| dc.contributor.department | Mühendislik-Mimarlık Fakültesi | en_US |
| dc.contributor.authorID | 0000-0001-7611-4854 | en_US |
| dc.identifier.volume | 34 | en_US |
| dc.identifier.startpage | 435 | en_US |
| dc.identifier.endpage | 443 | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
