Güncel Gönderiler: Endüstri Mühendisliği Bölümü
Toplam kayıt 83, listelenen: 41-60
-
Design optimization of magnetic flux distribution for PMG by using response surface methodology
(IEEE-Inst Electrical Electronics Engineers Inc, 2020)Determining the stator slot design parameters of the alternator has a great importance to provide the desired magnetic flux distribution for a permanent magnet generator (PMG). The objective of this article was to investigate ... -
Branch, bound and remember algorithm for two-sided assembly line balancing problem
(Elsevier, 2020)This research presents a new branch, bound and remember (BBR) algorithm to minimize the number of mated-stations in two-sided assembly lines. The proposed methodology modifies the Hoffman heuristic to achieve high-quality ... -
Optimizing cetane improver concentration in biodiesel-diesel blend via grey wolf optimizer algorithm
(Elsevier Sci Ltd, 2020)Biodiesel and their blends with diesel have long been used as alternative fuels in diesel engines. In particular, B20 is recommended in most studies since it reduces the exhaust emissions and provides satisfactory engine ... -
A comparative study of exact methods for the simple assembly line balancing problem
(Springer, 2020)Exact methods have shown advanced and promising performance in solving the simple assembly line balancing problem, known as NP-hard. This research investigates the impact of various structural parameters on the performance ... -
System reliability optimization for an assembly line under uncertain random environment
(Pergamon-Elsevier Science Ltd, 2020)An assembly line is an industrial arrangement of machines, equipments and operators for continuous flow of work-pieces in mass-production operations. Recently, the reliability of assembly production has been investigated ... -
Balancing of two-sided disassembly lines: Problem definition, MILP model and genetic algorithm approach
(Pergamon-Elsevier Science Ltd, 2020)The recovery of end of life (EOL) products has become an important issue in terms of economic as well as social and environmental considerations. Recent rigid environmental regulations also contribute to the popularity of ... -
MILP models to minimise makespan in additive manufacturing machine scheduling problems
(Pergamon-Elsevier Science Ltd, 2019)Additive manufacturing (AM), also known as 3D printing, is gaining enormous importance in the production of highly customised quality and lightweight products in low quantities. In addition to AM's use in producing fully ... -
A fast branch, bound and remember algorithm for disassembly line balancing problem
(Taylor & Francis Ltd, 2019)In recent years, the interests of disassembly line have increased owing to economic reasons and the increase of environmental awareness. Effective line can provide many advantages in terms of economic aspect and it facilitates ... -
Iterated local search method and mathematical model for sequence-dependent u-shaped disassembly line balancing problem
(Pergamon-Elsevier Science LTD, 2019)Disassembly lines play an important role in disassembling end-of-life products and retrieving the valuable components. Sequence-dependent time increments are inevitable due to the interactions between two tasks in some ... -
A mathematical model and artificial bee colony algorithm for the lexicographic bottleneck mixed-model assembly line balancing problem
(Springer, 2019)Typically, the total number of required workstations are minimised for a given cycle time (this problem is referred to as type-1), or cycle time is minimised for a given number of workstations (this problem is referred to ... -
A dynamic order acceptance and scheduling approach for additive manufacturing on-demand production
(Springer London LTD, 2019)Additive manufacturing (AM), also known as 3D printing, has been called a disruptive technology as it enables the direct production of physical objects from digital designs and allows private and industrial users to design ... -
Optimizing the efficiently used nickel ratio in nickel plating process by using response surface methodology
(Pamukkale Univ, 2019)Efficient usage of nickel, one of the important cost parameters of nickel chrome plating processes, is compulsory for competing. In this study, it is aimed to optimize the process parameters of the nickel baths of a ... -
Order acceptance and scheduling in direct digital manufacturing with additive manufacturing
(Elsevier, 2019)Conference: 9th IFAC/IFIP/IFORS/IISE/INFORMS Conference on Manufacturing Modelling, Management and Control (IFAC MIM) Location: Berlin, GERMANY Date: AUG 28-30, 2019 Sponsor(s):Int Federat Automat Control; Int ... -
Type-1 U-shaped Assembly line balancing under uncertain task time
(Elsevier, 2019)Recently, assembly line balancing problem with uncertain task time gains more and more attention in the literature. Task time uncertainty may overload workstations. Uncertain task time attributes were studied in the ... -
Establishment and use of virtual layouts for manufacturing
(2001)This study offers a new type of manufacturing approach. This approach may be called virtual manufacturing layouts. The study concerns basic themes of the approach. These are descriptions, elements, and use of the virtual ... -
A knowledge-based approach for selection of material handling equipment and material handling system pre-design
(2001)For material handling system design, material handling equipment selection is the first stage. Also the material handling system and facility layout design problems are coupled. Solving these problems needs consideration ... -
Lexicographic bottleneck mixed-model assembly line balancing problem: Artificial bee colony and tabu search approaches with optimised parameters
(Pergamon-Elsevier Science Ltd, 2016)The lexicographic bottleneck assembly line balancing problem is a recently introduced problem which aims at obtaining a smooth workload distribution among workstations. This is achieved hierarchically. The workload of the ... -
Balancing of parallel u-shaped assembly lines
(Pergamon-Elsevier Science Ltd, 2015)A new hybrid assembly line design, called parallel U-shaped assembly line system, is introduced and characterised along with numerical examples for the first time. Different from existing studies on U-shaped lines, we ... -
Mixed-model parallel two-sided assembly line balancing problem: A flexible agent-based ant colony optimization approach
(Pergamon-Elsevier Science Ltd, 2016)Assembly lines are frequently used as a production method to assemble complex products. Two-sided assembly lines are utilized to assemble large-sized products (e.g., cars, buses, trucks). Locating two lines in parallel ... -
A mathematical model and artificial bee colony algorithm for the lexicographic bottleneck mixed-model assembly line balancing problem
(Springer, 2019)Typically, the total number of required workstations are minimised for a given cycle time (this problem is referred to as type-1), or cycle time is minimised for a given number of workstations (this problem is referred to ...
