Yazar "Soutis, Constantinos" için listeleme
-
Bolted joints in three axially braided carbon fibre/epoxy textile composites with moulded-in and drilled fastener holes
Ataş, Akın; Gautam, Mayank; Soutis, Constantinos; Potluri, Prasad (Springer, 2017)Experimental behaviour of bolted joints in triaxial braided (0 degrees/+/- 45 degrees) carbon fibre/ epoxy composite laminates with drilled and moulded-in fastener holes has been investigated in this paper. Braided laminates ... -
Effect of delamination on the stress distribution of pin-loaded holes in composite laminates
Ataş, Akın; Soutis, Constantinos (Riso Natl Laboratory, 2011)A three-dimensional (3D) finite element (FE) model of a pin-loaded hole in a [0 degrees/90 degrees](s) carbon fiber-epoxy composite laminate is developed. Contact based cohesive zone elements (CZE) inserted between the ... -
Failure analysis of bolted joints in cross-ply composite laminates using cohesive zone elements
Ataş, Akın; Soutis, Constantinos (Tech Science Press, 2013)A strength prediction method is presented for double-lap single fastener bolted joints of cross-ply carbon fibre reinforced plastic (CFRP) composite laminates using cohesive zone elements (CZEs). Three-dimensional finite ... -
Modelling delamination onset and growth in pin loaded composite laminates
Ataş, Akın; Mohamed, Galal; Soutis, Constantinos (Elsevier Sci Ltd, 2012)A three-dimensional (3D) finite element (FE) model is created with cohesive zone elements (CZE) to simulate a mechanically fastened [0 degrees/90 degrees](s) pin-loaded joint in a composite laminate. The model incorporates ... -
Progressive failure analysis of bolted joints in composite laminates
Ataş, Akın; Mohamed, Galal; Soutis, Constantinos (Taylor & Francis Ltd, 2012)A three-dimensional progressive failure analysis methodology was developed to predict the strength of double lap bolted joints in [0 degrees/90 degrees/+/- 45 degrees](2s) carbon fibre reinforced plastic laminates. An ... -
A qualitative comparison of stresses at aircraft bolted joint holes under initial clamping force
Ataş, Akın; Soutis, Constantinos; Arslan, Nurettin (Elsevier Science Bv, 2011)The stress state around the middle (skin) plate hole of double-lap single bolted joints are investigated under an initial clamping force. Two different materials are considered for the middle plate: a quasi-isotropic carbon ... -
Strength prediction of bolted joints in CFRP composite laminates using cohesive zone elements
Ataş, Akın; Soutis, Constantinos (Elsevier Sci Ltd, 2014)A strength prediction method is developed for bolted joints in CFRP composite laminates using cohesive zone elements (CZEs). Three-dimensional finite element models were developed with one element per laminate layer using ... -
Subcritical damage mechanisms of bolted joints in CFRP composite laminates
Ataş, Akın; Soutis, Constantinos (Elsevier Sci Ltd, 2013)A detailed experimental programme is presented that was conducted in order to establish a data base for strength and subcritical damage mechanisms of bolted joints in CFRP composite laminates. Single fastener double-shear ...