Yazar "Bıçakçı, Sabri" için listeleme
-
An application of BRANN and MFL methods: Determining crack type and physical properties on M5 steel sheets
Ege, Yavuz; Bıçakçı, Sabri; Güneş, Hüseyin; Çıtak, Hakan; Çoramık, Mustafa (Elsevier Sci Ltd, 2019)Magnetic flux leakage (MFL) method is used frequently in researches on cracks on ferromagnetic materials. Recent studies on this method focused on the improvement of low power consumption and sensor sensitivity. Generally, ... -
Buried magnetic material detection system: An SVM algorithm application
Güneş, Hüseyin; Bıçakçı, Sabri; Çıtak, Hakan; Çoramık, Mustafa; Ege, Yavuz (IEEE-Inst Electrical Electronics Engineers Inc, 2021)In recent times, studies about remote-sensing methods have focused on improving variables like sensing distance, sensitivity, and power consumption of available remote-sensing methods. The main target of this study is to ... -
The determination of buried magnetic material from various heights: A neural network application
Çıtak, Hakan; Ege, Yavuz; Bıçakçı, Sabri; Güneş, Hüseyin; Çoramık, Mustafa (IEEE-Inst Electrical Electronics Engineers Inc, 2020)This article aims at determining the anomalies created by buried magnetic materials on the horizontal component of earth's magnetic field through the KMZ51 anisotropic magnetoresistive sensor (AMR) series and determining ... -
Determining the effect of velocity on sensor selection and position in non-destructive testing with magnetic flux leakage method: a pipe inspection gauge design study with Ansys Maxwell
Çoramık, Mustafa; Çıtak, Hakan; Ege, Yavuz; Bıçakçı, Sabri; Güneş, Hüseyin (IEEE- Inst Electrical Electronics Engineers Inc, 2023)The magnetic flux leakage (MFL) method, which is among the non-destructive testing (NDT) methods, is frequently used in the determination of discontinuity in ferromagnetic materials. The method focuses on the detection of ... -
Discontinuity detection system in marble: Analysis of the time-frequency characteristics of ultrasonic p-waves
Bıçakçı, Sabri; Çıtak, Hakan; Güneş, Hüseyin; Çoramık, Mustafa; Aydın, Yasin; Ege, Yavuz (Amer Soc Testing Materials, 2023)This study attempted to determine both the presence and the appearance of the surface of a crack artificially created in a marble block without axial loading or compression by FFT analysis of ultrasonic longitudinal sound ... -
Eksik tahrikli bir sistemin karınca kolonisi tabanlı optimal PD kontrolü: Deneysel bir uygulama
Ters sarkaç sistemi (IP) eksik tahrikli, doğrusal olmayan, kararsız ve kontrolü karmaşık bir sistemdir. Bu çalışmada ters sarkaç sistemi, sürtünme etkileri de dikkate alınarak modellenmiştir. Sistemin kontrolü için ... -
Hybrid simulation system for testing artificial intelligence algorithms used in smart homes
Bıçakçı, Sabri; Güneş, Hüseyin (Elsevier, 2020)Smart home automation systems allow the user to control and track lighting, security, ventilation and temperature systems more easily. While these systems provided easy control of the house depending on the commands only ... -
Increasing energy efficiency with fuzzy logic control in FPGA-Based electromagnetic stirrer
Bıçakçı, Sabri; Çoramık, Mustafa; Güneş, Hüseyin; Çıtak, Hakan; Ege, Yavuz (IEEE-Inst Electrical Electronics Engineers Inc, 2021)In this study, a new field-programmable gate array (FPGA)-based electromagnetic stirrer system was developed allowing mixing on a single axis, and the energy efficiency of the system was increased with fuzzy logic control. ... -
A new artificial neural network-based failure determination system for electric motors
Bıçakçı, Sabri; Çoramık, Mustafa; Güneş, Hüseyin; Çıtak, Hakan; Ege, Yavuz (Springer, 2021)In this study, a new measurement system was developed to determine failures and to defne the level of failure that may occur in bearings and rotor bearings or in foot of motor in single phase capacitor start motor. In the ... -
A new RMF stirrer using AISI4140 mild steel: Energy optimization application
Çıtak, Hakan; Bıçakçı, Sabri; Çoramık, Mustafa; Güneş, Hüseyin; Ege, Yavuz (SCIENDO, 2023)This study examines the development of a novel FPGA-based RMF stirrer system. The system has been designed as a 3-phase system, with each phase being fed by PWM voltage with a phase difference of 120 degrees. In case the ... -
On the Implementation of Fuzzy VMC for an under Actuated System
Bıçakçı, Sabri (IEEE, 2019)Most of control strategies are based on complex mathematical equations and the success of them is directly related to the precise acquisition of the mathematical model of the system. Virtual Model Control (VMC) allows the ... -
Optimizing karnopp friction model parameters of a pendulum using RSM
Bıçakçı, Sabri; Akdaş, Davut; Karaoğlan, Aslan Deniz (Elsevier Science Bv, 2014)Accurate mathematical models of physical systems are essential for understanding the behaviour of actual systems under different operating conditions and for designing control systems. In mechanical systems, difficulty of ... -
Rf uygulamalarda genel amaçlı tınlama frekansı takip edici sistem tasarımı
Bıçakçı, Sabri; Sis, Seyit Ahmet (2017)Bu çalışmada, radyo frekans uygulamaları için genel amaçlı bir tınlama (rezonans) frekansı takip edici sistem konfigürasyonu önerilmektedir. Önerilen sistem bir RF çift yönlü kuplajlayıcı (bidirectional coupler), doğrultucu ... -
Studies to ıncrease barrel exit velocity for four-stage coil-gun
Çoramık, Mustafa; Çıtak, Hakan; Bıçakçı, Sabri; Güneş, Hüseyin; Aydın, Yasin; Ege, Yavuz (IEEE-Inst Electrical Electronics Engineers Inc, 2020)The operating principle for electromagnetic launchers (EMLs) is based on electromagnetic theory. The process in EMLs involves the creation of a varying or moving strong electromagnetic field, and ensuring movement of the ... -
Yeni bir manyetik fırlatıcı tasarımı ve analizi: Bir ANSYS Maxwell uygulaması
Bıçakçı, Sabri; Çıtak, Hakan (2023)Bu çalışmada herhangi bir mekanik itici kullanmadan halka ve silindirik şeklindeki sabit mıknatıslardan oluşturulmuş yeni bir manyetik fırlatıcı tasarımı önerilmiştir. Tasarımda önce iki halka mıknatıs kullanılmış daha ...
